A.Discontinuous Transmission
B.Hysteresis
C.Dynamic Power Control
D.Frequency Hopping
E.Cell Load Sharing
A.Each cell can handle the same amount of subscribers
B.The network is dimensioned for all mobile classes
C.All cells are of the same size
D.All BTSs use the same output power
E.Uplink and downlink coverage is the same
A.Dynamic power control
B.Frequency hopping
C.Hysteresis
D.Cell load sharing
E.Discontinuous transmission
B.It modifies the sufficient level condition for neighboring cells and the serving cell
C.It is used to move the L-L border
D.It is used to move the K-K border. E.It is used to move both the K-K and the L-L borders.
Cell phones operate with radio frequencies,a form. of energy located on the electromagnetic spectrum between FM radio waves and the waves used in microwave ovens,radar,and satellite stations.Cell phones do not emit ionizing radiation,the type that damages DNA and is known to have the ability to cause cancer.
Cell phone technology works on a system of geographically separated zones called"cells".Each cell has its own "base station" that both receives and emits radio waves.When a call is placed from a cell phone,a signal is sent from the cell phone antenna to that cell's base station antenna.The base station responds to the cell phone signal by assigning the phone an available RF channel.When the RF channel is assigned,radio signals are simultaneously received and transmitted,allowing voice information to be carried between the cell phone and the base.The base station transfers the call to a switching centre, where the call can be transferred to a local telephone carrier or another cell phone.
6.There has existed argument about the link between cell phone and brain tumor()
7.The rapid growing number of cell phone users has been a great concern in the US()
8.The 3rd paragraph tries to prove that cell phones do not cause brain cancer()
9.A switching centre is needed when we make a call through cell phone()
10.The topic of the passage is about cell phone and cancer.()
A.BSC controlling the target cell
B.MSC controlling the target cell
C.BSC controlling the current cell
D.MSC controlling the current cell
B.C1 is a quality check and if not fulfilled, the idle mobile must try another cell to camp on
C.C1 and BSIC are reported to the serving cell, at least, once every five seconds to enable network controlled cell re-selection
D.At cell re-selection, the cell with the largest derived C1 is chosen to camp on
E.C1 is set to yes, if both CB and CBQ are low
A.Cell broadcast is used in a cell with a non-combined configuration
B.Cell broadcast is used in a cell with a combined configuration
C.System information, type 4, is sent on the BCCH
D.System information, type 5, is sent on the BCCH
E.MFRMS=2 or MFRMS=9
The cell (-)SCE || Ag2CrO4(saturated),CrO42-|Ag() is employed for the determination of pCrO42-. Calculate pCrO42-when the cell potential is 0.402 V.